Introduction to ADSS cable products:
ADSS cable The structure of loose sleeve layer stranding is adopted 250um The fiber sleeve is made of a special waterproof material. The loose tube is twisted around the non-metallic reinforcing member (FRP) to form a round cable core. The gap in the cable core is filled with water blocking ointment, and the outside of the cable core Extrusion Then two layers of aramid yarn are twisted in two directions to form PE sheath or at outer sheath.
Picture of ADSS cable products:
Features of ADSS cable products:
Small cable diameter, light weight, span up to 1500m, low additional load on the tower;
. PE / at sheath is optional, which has the best anti-corrosion performance;
It can adapt to harsh climate conditions, with icing up to 10 mm;
The aramid armoring process greatly improves the tensile strength of the optical cable, and the tensile strength can exceed 90kN;
The precise control of fiber excess length and twisted pitch ensures excellent tensile properties and temperature characteristics of optical cables;
Non metallic structure, good insulation performance, lightning protection, construction without power cut, power line failure does not affect the normal transmission of optical cable.